SM2412-15: Servicemate Converter 15 Amp Output

In stock

California Residents - Prop 65 Warning

 WARNING: Cancer and Reproductive Harm -


Built With Pride In The U.S.A

  • Heavy Duty DC to DC converter with Built-In Spike Filter
  • Added 5th wire for ignition on/off sensing, less than 4 ma draw if "OFF". The blue wire is an ACC wire. This wire needs to be connected to the key switch. This will allow the converter to switch on and off with your equipment. If this is not an option for you, connect the blue wire to 24-48 VDC for the converter to work
  • Designed for use on electrical vehicles with re-generative braking. (Re-generative braking develops tremendous voltage spikes). Max input spike duration: 100 VDC for one minute - transients above 100V limited to 1500W peak pulse power for 1ms, repetition rate (duty cycle) <0.01%
  • Less than 40 mv p-p ripple
  • Output voltage: 13.5/13.9 (will not vary out of this range)
  • Output current (full load) 15A
  • Input Current (no load) 30ma/40ma 
  • Load regulation .030/.200 VDC
  • 6-1/4" L x 2" H x 4-1/4" W
  • Weight: 3.2 lbs.
  • NOTE: Converters may be mounted on the outside of a piece of equipment, but they need to use weather sealed connectors on the wires and they need to protect the fuse holder (it could be damaged if hit).
  • Features

    • Weatherproof
    • Vibration resistant
    • Switched voltage regulation
    • High efficiency
    • Short circuit protected
    • Thermal protected
    • Soft start (for starting inductive loads)
    • Reverse voltage protection
    • Input and output filtering
    • Two year limited warranty
    • UL & CE Certified
Write Your Own Review
You're reviewing:SM2412-15: Servicemate Converter 15 Amp Output
Your Rating
Copyright © 2013-present Magento, Inc. All rights reserved.